Height Adjustable Lift Systems for WORKTOPS - WALL MOUNTED - TWO SYSTEMS
Manulift 6350-Manual Operation – via wider system
The Manulift 6350 is a manual wall mounted height adjustable worktop lift system, is used to raise and lower worktops vertically and height adjustment is via a crank wider handle system.
The worktop is manually adjustable by 300mm (30cm) intervals of 25mm (2.5cm) and 700mm to 1000mm excluding benchtop.
Designed for use in seated or standing positions, caters for front, easy and direct access and extra leg space underneath worktop in seated positions.
The manual solution is applicable for infrequent adjustment. For frequent adjustment, electric applications are more suitable.
For further information please see brochure or contact Inclusive Living.
BrochureManulift 6380-Manual Operation – via built-in gas spring system
The Manulift 6380H is a manual wall mounted height adjustable worktop lift system, is used to raise and lower worktops vertically. The worktop is manually adjustable by 300mm (30cm) intervals of 25mm (2.5cm) and 700mm to 1000mm excluding benchtop.
A built-in gas spring facilitates height adjustment: via pulling out locking pin, adjust the height with help of gas spring and then lock into position via locking pin.
Designed for use in seated or standing positions, caters for front, easy and direct access and extra leg space underneath worktop in seated positions.
The manual solution is applicable for occasional adjustment. For frequent adjustment, electric applications are more suitable.
For further information please see brochure or contact Inclusive Living.
Height Adjustable Lift Systems for WALL CABINETS-WALL MOUNTED
Manulift 6280-Manual Operation-via hook mounting system
Wall CABINETS-Hook mountings for wall cabinets provides manual adjustment in increments of 5.0cm, 25.0cm in total. Suitable for cabinet heights between 70.0cm to 110.0cm
An aluminium rail is screwed onto the wall. Hooks are screwed behind the cabinet. The cabinets are suspended on the aluminium rail at the required height. Adjustable spacers are inserted at the lower edge of the cabinet. (To compensate for the cabinet’s extension at the upper edge).
Manual solution is applicable for occasional adjustment. For frequent adjustment, electric applications are more suitable.
For further information please see brochure or contact Inclusive Living
-
- Manulift 6350
-
- Manulift 6350
-
- Manulift 6380
-
- Manulift 6380
-
- Manulift 6280 is designed to provide adaptability and is applicable for occasional/infrequent adjustment
-
- Manulift 6280 is a hook mounting manual system for wall cabinets & worktops, adjusts of upto 25cm
